Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Soldano Avenger 50 Standard Retube Kit

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Soldano > Soldano Avenger 50

Price: $140.00

Soldano Avenger 50 Standard Retube Kit

Product Details

Looking to warm up your Avenger? This is our Standard Retube Kit for the Soldano Avenger 50 and Hot Rod Avenger 50 Amps. It uses four ECC83S's with one being current balanced for the phase inverter in V4. The default power tubes are a matched pair of the JJ 6L6GC's but you can configure this kit to use the JJ KT66's or JJ 5881's to drop the power output a couple decibels by clicking on the "Customize" button!

The Balanced ECC83S is located in V4 which is the farthest preamp tube away from the input jack.

These amps are adjustable bias. All you need to check and set the bias is one of our 8 pin bias probes with a Multimeter, or our all-in-one 8 pin "Pro One" bias probe (which reads plate voltage and plate current simultaneously). These are available under the "Related Products" tab.

You can use the bias video we did on a Marshall 800 for reference, the procedure is the same.

The video below explains the difference between bias probe types.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

Eurotubes “Pro One” Bias Probe for octal power tubes

Price $109.00

Eurotubes Octal Bias Probe

Price $30.00

Eurotubes 10 Gauge 3 foot Speaker Cable

Price $33.00

Eurotubes 10 Gauge 6 foot Speaker Cable

Price $42.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.