Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Soldano Astroverb 16 ECC803S V1 Option

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Soldano > Soldano Astroverb 16

Price: $150.50

Soldano Astroverb 16 ECC803S V1 Option

Product Details

Looking for a vintage vibe with FAT mids and a real sparkle? This is the ECC803S V1 Option Retube Kit for the Soldano Astroverb Heads and Combo Amps. The preamp section uses a JJ Long Plate ECC803S for V1 for a little lower gain with big thick mids and a little more sparkle in the highs. We follow that up with four ECC83S with one being current balanced for the phase inverter in V5. The default power tubes are a matched pair of the JJ EL84's. With the Customize option you can configure this kit to use the JJ EL844's which will drop the power output a couple decibels (ideal for players wanting decreased headroom/output).

The Balanced ECC83S is located in V5 which is located closest to the power tubes in the back row and the ECC803S is located in V1.

Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If your amp is the combo version and you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings for the two EL84’s. These are available in the "Related Products” tab as a set of two small dampers and will greatly decrease tube rattle.

These amps are adjustable bias. All you need to check and set the bias is one of our 9 pin bias probes with a Multimeter, or our all-in-one 9 pin "Pro One" bias probe (which reads plate voltage and plate current simultaneously). These are available under the "Related Products" tab.

EL84's should bias up to between 22 to 26 mA per tube.
The JJ EL844's are a 9 watt tube and should bias up to between 16 to 20 mA per tube.

You can use our Generic Bias Video for reference.

The video below explains the difference between bias probe types.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

Eurotubes “Pro One” Bias Probe for EL84 power tubes

Price $139.00

Eurotubes 9-Pin Bias Probe

Price $57.00

EuroDamper Small - Pair

Price $9.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.