Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Rivera 100 Watt Amps Gold Pin Option

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Rivera > Rivera 100 Watt Amps

Price: $290.00

Rivera 100 Watt Amps Gold Pin Option

(Click to see larger image and other views)

Product Details

Want a very rich and smooth tone with less grit? This is our Gold Pin Option Retube Kit for the Rivera 100 watt amps including the Bonehead 100, the R100, the M100, the Fandango 100, the Quiana 100, the Knucklehead 100 and Knucklehead K Tre 100. The preamp section uses five Gold Pin ECC83S's with one balanced for the phase inverter in V5. The default power tubes are the JJ Electronic E34L’s but you can configure this kit to use the JJ 6L6GC's, the JJ 5881's, the JJ EL34II's, EL34’s, KT77’s or Big Bottle 6CA7’s by clicking on the "Customize" button.

The Balanced Gold Pin ECC83S is located farthest from the input jack in V5.

If your amp is the combo version and you have chosen to use the JJ 6L6GC's then please let us know in the comments section and we will ship your kit with the special Double Mica 6L6GC’s at no extra charge which will greatly reduce any tube rattle. JJ Electronic started building us a proprietary version of their 6L6GC (the 6L6GC-DM) in 2005 with extra layers of mica. This reinforces the plate structure and all but eliminates tube rattle symptoms. For all other tubes such as EL34’s, KT77's and 6CA7's, we recommend using our EuroDamper rings. These are available under the "Related Products" tab and will greatly decrease tube rattle.

These are all adjustable bias amps and all you need to check and adjust the bias is a bias probe and a Multimeter, or our all-in-one Eurotubes "Pro One" bias probe that reads both the plate current and the plate voltage simultaneously. You can find all these under the Related Products Tab. Any of the Rivera amps that came with 6L6's can also use EL34 type tubes.

You can use the "Generic Bias Video" we made using a Marshall 800 for reference.

The video below explains the difference between bias probe types.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

Eurotubes “Pro One” Bias Probe for octal power tubes

Price $109.00

Eurotubes Octal Bias Probe

Price $30.00

Eurotubes 10 Gauge 3 foot Speaker Cable

Price $33.00

Eurotubes 10 Gauge 6 foot Speaker Cable

Price $42.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.