Peavey Penta Custom Retube Kit

Custom Kit

Want it your way? The "Custom Kit" is just that, you get to choose your power tubes and all your preamp tubes! We'll give you all the power tube options and then you can choose your V1 tube and all your other preamp tubes! We give you all the positions and you fill them! We left the quantity fields open so that spares or multiple tubes could be ordered to experiment with.

Custom Kit

Power-Tubes

You can run a matched quads of the E34L's, EL34II's, KT77's, 6CA7's or EL34's. Please see click on the "More Details" button to get an in-depth description of the tonal differences.

E34L Matched Quad -

More details

EL34II Matched Quad -

More details

KT77 Matched Quad -

More details

6CA7 Matched Quad -

More details

EL34 Matched Quad -

More details

Your V1 tube is your input and first gain stage and is the tube that shapes the tone of your amp. Any of these tubes will sound very good, but here is your chance to really dial in your tone. We left the "Quantity Field" active for those of you who may want a couple different V1 tubes to experiment with. Please see click on the "More Details" button to get an in-depth description of the tonal differences.

ECC83S Standard -

More details

ECC83S High Gain -

More details

ECC83S Gold Pin -

More details

ECC803S Standard -

More details

ECC803S Gold Pin -

More details

ECC83 MG Standard -

More details

ECC83 MG Gold Pin -

More details

5751 Standard -

More details

5751 Gold Pin -

More details

The V2 position in your amp is the cathode follower and tone stack. Here you can increase or decrease the gain, or even smooth it out with a Gold Pin tube. Please see click on the "More Details" button to get an in-depth description of the tonal differences.

ECC83S Standard -

More details

ECC83S High Gain -

More details

ECC83S Gold Pin -

More details

ECC83 MG Standard -

More details

ECC83 MG Gold Pin -

More details

ECC803S Standard -

More details

ECC803S Gold Pin -

More details

5751 Standard -

More details

5751 Gold Pin -

More details

Bias Probes and Multimeters

These are all adjustable bias amps and all you need to check and adjust the bias is a bias probe and a Multimeter, or our all-in-one Eurotubes "Pro One" bias probe that reads both the plate current and the plate voltage simultaneously.

Eurotubes “Pro One” Bias Probe for octal power tubes -

More details

Eurotubes Octal Bias Probe -

More details

Cables-

These are made in-house from USA made real 10 Gauge oxygen free copper cable and high quality heavy duty 1/4" jacks. These cables leave no frequency unheard!

Eurotubes 10 Gauge 3 foot Speaker Cable -

More details

Eurotubes 10 Gauge 6 foot Speaker Cable -

More details

Configure: Peavey Penta Custom Retube Kit