The cart is empty.
Cart contains {{shoppingcart.totalQuantity}} Item(s) Total:
{{shoppingcart.subtotal}}
{{shoppingcart.total}}
Register/Login
Configure: Peavey Classic 30 / 50 & Delta Blues Custom Retube Kit
Peavey Classic 30 / 50 & Delta Blues Custom Retube Kit
Configured Price:
Peavey Classic 30 / 50 & Delta Blues Custom Retube Kit
Custom Kit
Want it your way? The "Custom Kit" is just that, you get to choose your power tubes and all your preamp tubes! We'll give you all the power tube options and then you can choose your V1 tube and all your other preamp tubes! We give you all the positions and you fill them!. We left the quantity fields open so that spares or multiple tubes could be ordered to experiment with.
Custom Kit
Power-Tubes
Here you do have two choices, one is to go with the JJ EL84's which sound great in these amps. The second choice is to go with the JJ EL844's, these are completely different tubes than the stock tubes your Classic 30, Classic 50 or Delta Blues amp came with, however these are plug and play with no mods necessary. The JJ EL844’s are a proprietary tube that JJ Electronic built at the request of Eurotubes. The dissipation of the JJ EL844 is 25% less than a standard EL84 so using the EL844’s will reduce the power a little in your amp. Please click on the “More Details” button for an explanation of the tonal differences between tubes.
EL84 Matched Quad
-
More details
EL844 Matched Quad
-
More details
V1
The first position preamp tube closest to the input jack is V1. It is the main input tube and shapes the entire tone stack, here you can maintain gain, reduce it, increase it or smooth it out with a Gold Pin tube. We left the "Quantity Field" active for those of you who may want a couple different V1 tubes to experiment with. Please click on the “More Details” button for an explanation of the tonal differences.
ECC83S Standard
-
More details
ECC83S High Gain
-
More details
ECC83S Gold Pin
-
More details
ECC803S Standard
-
More details
ECC803S Gold Pin
-
More details
ECC83 MG Standard
-
More details
ECC83 MG Gold Pin
-
More details
5751 Standard
-
More details
5751 Gold Pin
-
More details
ECC81 (12AT7) Standard
-
More details
ECC81 Gold Pin
-
More details
V2
The second preamp tube from the input or V2 will mainly affect the drive channel, here you can again maintain gain, reduce it with a 5751, or increase it. You can smooth it out with a Gold Pin tube. Please click on the “More Details” button for an explanation of the tonal differences.
ECC83S Standard
-
More details
ECC83S High Gain
-
More details
ECC83S Gold Pin
-
More details
ECC803S Standard
-
More details
ECC803S Gold Pin
-
More details
ECC83 MG Standard
-
More details
ECC83 MG Gold Pin
-
More details
5751 Standard
-
More details
5751 Gold Pin
-
More details
ECC81 (12AT7) Standard
-
More details
ECC81 Gold Pin
-
More details
ECC832 (12DW7)
-
More details
ECC832 Gold Pin
-
More details
V3
V3 is the final gain stage and split-load phase inverter. Half of it drives the power tubes so a balanced tube is not necessary. We like the sound of a tube that has a higher current output which make the amp more lively which is what our kits come with, but you can use any of the tubes listed below. You can decrease or increase the gain or you can smooth it out with a Gold Pin tube. Please click on the “More Details” button for an explanation of the tonal differences.
ECC83S High Current
-
More details
ECC83S Gold Pin High Current
-
More details
ECC83S High Gain
-
More details
ECC83S Gold Pin
-
More details
ECC83S Standard
-
More details
ECC83 MG Standard
-
More details
ECC83 MG Gold Pin
-
More details
5751 Standard
-
More details
5751 Gold Pin
-
More details
ECC81 (12AT7) Standard
-
More details
ECC81 Gold Pin
-
More details
EuroDamper Tube Damper Rings
The small EuroDamper Rings are for use on all nine pin preamp tubes and EL84 type power tubes. These are great in small combo amps for reducing tube rattle. They are 4.50 each, just fill in the quantity window and check the box if you want some. These will greatly decrease tube rattle, however you will need to remove the wire retainers to use them.
EuroDamper Small - Tube Damper Ring for EL84 and preamp tubes
-
More details
Cables-
These are made in-house from USA made real 10 Gauge oxygen free copper cable and high quality heavy duty 1/4" jacks. These cables leave no frequency unheard!
Eurotubes 10 Gauge 3 foot Speaker Cable
-
More details
Eurotubes 10 Gauge 6 foot Speaker Cable
-
More details
Total
Default Price:
Configuration:
Items Discounts:
Price as Customized:
Add to Cart
© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.
Preamp-Tubes-c2.htm
Retube™ kits for Guitar amps!
Retube™ kits for Bass amps!
Preamp Tubes
Power Tubes
Rectifier Tubes
Bias Probes and Multimeters
Electrolytic Capacitors
Tube Damper Rings
Spring & Cap Tube Retainers
Cables
JJ Hifi Amps and Preamps
Tee Shirts & Swag
What's New Page
Preamp Tube Descriptions
Power Tube Descriptions
The "JJ One" Guitar Amp
The JJ EL844 Page
Tube Damper Rings
JJ Capacitors
Cables
Weber Speakers
Tube Substitutions
How do the JJ's compare?
JJ Electronic Hifi Amps
JJ 2A3-40 Review
JJ 828 VTV Review
Testing & Misc Info
Anderson Amp Page
B52 Amp Page
< a href="bugera%20amp%20page.htm">Bugera Amp Page
Carvin Amp Page
Crate Amp Page
Fender Amp Page
Marshall Amp Page
Mesa Boogie Amp Page
Orange Amp Page
Peavey Amp Page
Integrated Quads & a Rebuttal for Roger Crimm
Rivera Amp Page
Traynor Amp Page
SUNN Amp Page
VOX Amp Page
Ampeg Bass Amp Page
Fender Bass Amp Page
Mesa Boogie Bass Amp Page
SUNN Bass Amp Page
Gallery
Bias Probes
Bias Videos
FAQ Page
Gain Distortion & other Mysteries
Links
Customer Reviews
Yngwie Malmsteen's endorsement for JJ Electronic tubes
Amp Reviews
NAMM Reviews
A word from Conrad Amps
"Better Guitar" Reviews
Young Guitars
In The Beginning
Who is ET?
Who is JJ Electronic?
Exclusive JJ Factory Tour
Jan Jurcho
×
Global Message
Quick View