Mesa Boogie Stiletto Deuce Custom Retube Kit

Custom Kit

Want it your way? The "Custom Kit" is just that, you get to choose your power tubes from either the "Power-Tubes" category or the more exotic "Integrated Quads" category and all your preamp tubes! We'll give you all the tube types that we know work. Then you can choose your V1 tube and all your other preamp tubes! We give you all the positions and you fill them!. We left the quantity fields open so that spares or multiple tubes could be ordered to experiment with.

Custom Kit

Power-Tubes

Any of the power tubes listed below are compatible with your amp. All our Mesa Retube Kits include power tubes that are hand selected to run perfectly in Mesa amps. We have extensive hands-on experience measuring the fixed bias points in these amps and what grade of tubes will achieve optimal performance. These amps are fixed bias with no adjustment and you can run the JJ E34L's, EL34II's, EL34's, KT77's or Big bottle 6CA7's. Please click on the “More Details” button for an explanation of the tonal differences.

E34L Matched Quad -

More details

EL34II Matched Quad -

More details

6CA7 Matched Quad -

More details

KT77 Matched Quad -

More details

EL34 Matched Quad -

More details

Integrated-Quads

So you want something different? Maybe even exotic? Well here ya go! We've been doing "Integrated Quads" since 1998 and all of the "Integrated Quads" listed below are compatible with your Stiletto Deuce. The Integrated Quads below are the ones we have found to sound best together.

Integrated Quad E34L KT77 -

More details

Integrated Quad EL34 6CA7 -

More details

Integrated Quad E34L 6CA7 -

More details

V3 is the fourth and fifth stage gain stages, here you can again increase or decrease the gain or smooth it out with a Gold Pin tube. The only tubes we stay away from in V3 are the long plate tubes which are more prone to feeding back in the lead position.

ECC83S Standard -

More details

ECC83S High Gain -

More details

ECC83S Gold Pin -

More details

ECC83 MG Standard -

More details

ECC83 MG Gold Pin -

More details

5751 Standard -

More details

5751 Gold Pin -

More details

ECC81 (12AT7) Standard -

More details

ECC81 Gold Pin -

More details

V5 is the Phase Inverter tube, we always use a balanced tube in this position. The tubes listed are what we have found to work best.

ECC83S Balanced -

More details

ECC83S Gold Pin Balanced -

More details

ECC83S High Gain Balanced -

More details

ECC803S Balanced -

More details

ECC803S Gold Pin Balanced -

More details

ECC83 MG Balanced -

More details

ECC83 MG Gold Pin with Balanced Triodes -

More details

5751 Balanced -

More details

Rectifier-tubes

If you need or want to replace your Rectifier tube we have two great options for you. JJ Electronic has a great new production 5U4GB with dynamics equal to the old RCA 5U4GB, not too stiff with just the right amount of sag. These are a very nice upgrade from the stock 5U4. Some players much prefer to replace the 5U4 with a GZ34. This way the amp is not as sluggish with even tighter articulation. The JJ GZ34’s are a plug and play option for these amps.

5U4GB -

More details

GZ34 (5AR4) -

More details

EuroDamper Tube Damper Rings

Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If your amp is the combo version and you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings. These are 5.00 each.

EuroDamper Large - Set of Four -

More details

Cables-

These are made in-house from USA made real 10 Gauge oxygen free copper cable and high quality heavy duty 1/4" jacks. These cables leave no frequency unheard!

Eurotubes 10 Gauge 3 foot Speaker Cable -

More details

Eurotubes 10 Gauge 6 foot Speaker Cable -

More details

Configure: Mesa Boogie Stiletto Deuce Custom Retube Kit