f Find us on Facebook Home Shop Online Product Info Amp Info Bias Info FAQ "+" Reviews About ET

Configure: Mesa Boogie Mark IV Custom Retube Kit

Mesa Boogie Mark IV Custom Retube Kit
Configured Price:
Mesa Boogie Mark IV Custom Retube Kit
Mesa Boogie Mark IV Custom Retube Kit
Custom Kit
Want it your way? The "Custom Kit" is just that, you get to choose your power tubes and all your preamp tubes! We'll give you all the combinations that we know work and then you can combine 6L6GC's with KT77's or Big Bottle 6CA7's or?? Then you can choose your V1 tube and all your other preamp tubes! We give you all the positions and you fill them!. We left the quantity fields open so that spares or multiple tubes could be ordered to experiment with.
Custom Kit
Power-Tubes
You can run a matched quad of the 6L6GC's or 5881's, or a matched pair of 6L6GC's or 5881's with a pair of E34L's, EL34II's, KT77's, 6CA7's or EL34's. Keep in mind you can start with a quad of 6L6GC’s and then order additional pairs of EL34’s to experiment with (in the outside sockets). This is great for players that are unfamiliar with EL34 styles as it leaves you with a full quad of 6L6GC’s to fall back on. Remember, you must stick with 6L6GC’s for the inside sockets or 5881's. The Mark IV can also use a quad of 6V6S's, Mesa recommends only doing this in the Tweed mode.
6L6GC Matched Pair  - 
5881 Matched Pair  - 
E34L Matched Pair  - 
EL34II Matched Pair  - 
KT77 Matched Pair  - 
6CA7 Matched Pair  - 
EL34 Matched Pair  - 
6L6GC Matched Quad  - 
6V6S Matched Quad  - 
5881 Matched Quad  - 
V1
Your V1 tube is your clean channel and is the tube that shapes the tone of your amp. Any of these tubes will sound very good, but here is your chance to really dial in your tone. Read the "More details" for descriptions. We left the "Quantity Field" active for those of you who may want a couple different V1 tubes to experiment with.
ECC83S Standard  - 
ECC83S Gold Pin  - 
ECC83 MG Standard  - 
ECC83 MG Gold Pin  - 
ECC83S High Gain  - 
5751 Standard  - 
5751 Gold Pin  - 
ECC81 (12AT7) Standard  - 
ECC81 Gold Pin  - 
V2
The V2 position in your amp is the third gain stage stage and rhythm modes and side two is the FX return. Here you can increase or decrease the gain, or even smooth it out with a Gold Pin tube. If you choose to lower the gain here then your FX return will also decrease in gain slightly.
ECC83S Standard  - 
ECC83S Gold Pin  - 
ECC83S High Gain  - 
5751 Standard  - 
5751 Gold Pin  - 
ECC83 MG Standard  - 
ECC83 MG Gold Pin  - 
ECC81 (12AT7) Standard  - 
ECC81 Gold Pin  - 
V3
V3 is the First Lead gain stage and verb return, here you can again increase or decrease the gain or smooth it out with a Gold Pin tube. The only tubes we stay away from in V3 are the long plate tubes which are more prone to feeding back in the lead position.
ECC83S Standard  - 
ECC83S High Gain  - 
ECC83S Gold Pin  - 
ECC83 MG Standard  - 
ECC83 MG Gold Pin  - 
5751 Standard  - 
5751 Gold Pin  - 
ECC81 (12AT7) Standard  - 
ECC81 Gold Pin  - 
V4
V4 is the Second lead high gain stage and reverb send, the tubes listed are what we have found to work best.
ECC83S Standard  - 
ECC83S Gold Pin  - 
ECC803S Standard  - 
ECC803S Gold Pin  - 
ECC83 MG Standard  - 
ECC83 MG Gold Pin  - 
5751 Standard  - 
5751 Gold Pin  - 
ECC81 (12AT7) Standard  - 
ECC81 Gold Pin  - 
V5
V5 is the Phase Inverter tube, we always use a balanced tube in this position. The tubes listed are what we have found to work best.
ECC83S Balanced  - 
ECC83S Gold Pin Balanced  - 
ECC83S High Gain Balanced  - 
ECC803S Balanced  - 
ECC803S Gold Pin Balanced  - 
ECC83 MG Balanced  - 
ECC83 MG Gold Pin with Balanced Triodes  - 
5751 Balanced  - 
EuroDamper Tube Damper Rings
Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If your amp is the combo version and you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings. If your amp is the combo version then please let us know in the comments section. All Combo amp Retube Kits are shipped with the Eurotubes Double Mica 6L6GC’s at no extra charge. JJ Electronic started building us a proprietary version of their 6L6GC (the 6L6GC-DM) in 2005 with extra layers of mica. This reinforces the plate structure and all but eliminates tube rattle symptoms. For all other tubes such as, 6V6S’s, EL34’s, KT77's, 6CA7's and E34L’s, we recommend using our EuroDamper rings. These are 5.00 each.
EuroDamper Large - Tube Damper Ring for octal base tubes  - 
Cables-
These are made in-house from USA made real 10 Gauge oxygen free copper cable and high quality heavy duty 1/4" jacks. These cables leave no frequency unheard!
Eurotubes 10 Gauge 3 foot Speaker Cable  - 
Eurotubes 10 Gauge 6 foot Speaker Cable  - 

Total
Default Price:
Configuration:
Items Discounts:
Price as Customized:












© 1998 - 2014 Eurotubes Inc.  All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.
A website for musicians by musicians. Home Shop Online Product Info Amp Info Bias Info FAQ "+" Reviews About ET Email Phone 5036597401 EUROTUBES
Preamp-Tubes-c2.htm
Loading...