Marshall TSL60, TSL601 and TSL602 Custom Retube Kit

Custom Kit

Want it your way? The "Custom Kit" is just that, you get to choose your power tubes and all your preamp tubes! We'll give you all the power tube options and then you can choose your V1 tube and all your other preamp tubes! We give you all the positions and you fill them!. We left the quantity fields open so that spares or multiple tubes could be ordered to experiment with.

Custom Kit

Power-Tubes

You can run a matched pairs of the E34L's, EL34II's, KT77's, 6CA7's or EL34's. Please see click on the "More Details" button to get an in-depth description of the tonal differences.

E34L Matched Pair -

More details

EL34II Matched Pair -

More details

6CA7 Matched Pair -

More details

KT77 Matched Pair -

More details

EL34 Matched Pair -

More details

Your V1 tube is your input and first gain stage and is the tube that shapes the tone of your amp. Any of these tubes will sound very good, but here is your chance to really dial in your tone. Read the "More details" for descriptions. We left the "Quantity Field" active for those of you who may want a couple different V1 tubes to experiment with.

ECC83S Standard -

More details

ECC83S High Gain -

More details

ECC83S Gold Pin -

More details

ECC803S Standard -

More details

ECC803S Gold Pin -

More details

ECC83 MG Standard -

More details

ECC83 MG Gold Pin -

More details

5751 Standard -

More details

5751 Gold Pin -

More details

The V2 position in your amp is the second stage drive tube. Here you can increase or decrease the gain, or even smooth it out with a Gold Pin tube.

ECC83S Standard -

More details

ECC83S High Gain -

More details

ECC83S Gold Pin -

More details

ECC83 MG Standard -

More details

ECC83 MG Gold Pin -

More details

ECC803S Standard -

More details

ECC803S Gold Pin -

More details

5751 Standard -

More details

5751 Gold Pin -

More details

V3 is the final gain stage and cathode follower so here we tend to stay with 12AX7 / ECC83 type tubes. You can maintain the gain, increase it or smooth it out with a Gold Pin tube. The only tubes we stay away from in V3 are the long plate tubes which are more prone to feeding back in the lead position.

ECC83S Standard -

More details

ECC83S High Gain -

More details

ECC83S Gold Pin -

More details

ECC83 MG Standard -

More details

ECC83 MG Gold Pin -

More details

EuroDamper Tube Damper Rings

Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If your amp is the DSL 40C combo version and you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings. These are 10.00 a pair.

EuroDamper Large - Pair -

More details

Cables-

These are made in-house from USA made real 10 Gauge oxygen free copper cable and high quality heavy duty 1/4" jacks. These cables leave no frequency unheard!

Eurotubes 10 Gauge 3 foot Speaker Cable -

More details

Eurotubes 10 Gauge 6 foot Speaker Cable -

More details

Configure: Marshall TSL60, TSL601 and TSL602 Custom Retube Kit