Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Marshall DSL 201 Low Output Gold Pin Option

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Marshall > Marshall DSL-201 Low Output Kits

Price: $195.00

Marshall DSL 201 Low Output Gold Pin Option

Product Details

Want the smoothest richest tone possible from your DSL 201 but you also want the earlier breakup of the EL844's? This kit contains a matched pair of JJ EL844's to drop the overall output a couple decibels for the power section. Three standard Gold Pin ECC83S's for V1 thru V3 and a balanced Gold Pin ECC83S for the phase inverter in V4. A nice upgrade in tone and an earlier breakup from the power tubes.

The Balanced Gold Pin ECC83S is located in V4 closest to the power tubes.

Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings for the two EL844's. These are available in the "Related Products” tab as a set of two and will greatly decrease tube rattle.

When setting the bias for JJ EL844's it needs to be set between .300 to .380 Volts. All you need is a Multimeter to do this.

Below is the Marshall bias guide which you can use ONLY for reference.
Marshall 201-401 Bias

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

EuroDamper Small - Pair

Price $9.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.