Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Marshall 100 Watt 1959 ECC803S V1 Option

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Marshall > Marshall 100 Watt Plexi and 1959 Amps

Price: $168.50

Marshall 100 Watt 1959 ECC803S V1 Option

Product Details

Looking for a vintage vibe? This is the ECC803S V1 Option. This Retube Kit is for the early 60's and 70's 100 Watt Marshall Amps including the 1959 Super Lead, the 1992 Super Bass, original Plexi's and the 1959S and 1959X Reissue amps. The preamp section uses a JJ Long Plate ECC803S for V1 for a little lower gain with big thick mids and a little more sparkle in the highs, a standard ECC83S for V2 and a balanced ECC83S for the phase inverter in V3. The default power tubes are the JJ Electronic E34L’s but you can configure this kit to use the JJ EL34II's, EL34’s, KT77’s or Big Bottle 6CA7’s by clicking on the "Customize" button.

The Balanced ECC83S is located closest to the power tubes in V3 and the ECC803S is located inV1.

Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If your amp is the combo version and you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings for the power tubes. These are available in the "Related Products” tab as a set of four. These will greatly decrease tube rattle.

These are all adjustable bias amps and all you need to check and adjust the bias is a bias probe and a Multimeter, or our all-in-one Eurotubes "Pro One" bias probe that reads both the plate current and the plate voltage simultaneously. You can find all these under the Related Products Tab.

You can use the "Generic Bias Video" we made using a Marshall 800 for reference.

The video below explains the difference between bias probe types.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

Eurotubes “Pro One” Bias Probe for octal power tubes

Price $109.00

Eurotubes Octal Bias Probe

Price $30.00

Eurotubes 10 Gauge 3 foot Speaker Cable

Price $33.00

Eurotubes 10 Gauge 6 foot Speaker Cable

Price $42.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.