Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Marshall 100/100 Power Amp Gold Pin Option

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Marshall > Marshall 100/100

Price: $370.00

Marshall 100/100 Power Amp Gold Pin Option

Product Details

This is the Gold Pin Option Retube Kit for the Marshall 100/100 Power Amp. The front end uses two Matched and Balanced ECC81's and two Matched and Balanced ECC83S's for a very smooth and rich tone. The default power tubes are a matched octet of the JJ E34L's, but you can configure this kit to use the JJ EL34II's, EL34’s, KT77’s or Big Bottle 6CA7’s by clicking on the "Customize" button.

The two ECC81's replace the two 12AT7's and the two Matched and Balanced ECC83S's replace the 12AX7's.

The bias pots are accessed from the bottom of the amp, there are four small holes and the two outside holes on each side are the bias trimmers. We use bias probes to test and set the bias on these amps. You can bias one tube on one side and then one tube on the other side.

You can use our Generic Bias Video for reference.

The video below explains the difference between bias probe types.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

Eurotubes “Pro One” Bias Probe for octal power tubes

Price $109.00

Eurotubes Octal Bias Probe

Price $30.00

Eurotubes 10 Gauge 3 foot Speaker Cable

Price $33.00

Eurotubes 10 Gauge 6 foot Speaker Cable

Price $42.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.