Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Fender Supersonic 22 Gold Pin Option

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Fender > Fender Supersonic 22

Price: $238.00

Fender Supersonic 22 Gold Pin Option

Product Details

Want a real smooth and rich tone with less grit? This kit uses a matched pair of the JJ 6V6S's for power, three Gold Pin ECC83S's for V1, V2 and V4 along with one standard Gold Pin ECC81 for V3 and a balanced Gold Pin ECC81 for the phase inverter. A great way to go if you're after a Carlos or Eric Johnson type tone!

Tube location info: The Balanced Gold Pin ECC81 is located in V5 closest to the power tubes and the standard Gold Pin ECC81 is located in V3.

Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If your Supersonic 22 is the combo version and you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings for the two 6V6S’s. These are available in the "Related Products” tab as a set of two and will greatly decrease tube rattle.

All you need to adjust the bias on a these amps is a multimeter and you can use the test points #40 and #41 to measure the bias in Millivolts. You can also use a bias probe and digital multimeter to do the job or the Eurotubes "Pro One". All of these are are available in the "Related Products" tab.

We typically bias the JJ 6V6S's in these amps to between 22 to as high as 28mA. If you use the test points you can use the HotRod Deluxe bias video for reference. The procedure is the same but the test point locations are different, see the image below.

We typically bias the JJ 6V6S's in these amps to between 22 to as high as 28mA.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

Eurotubes “Pro One” Bias Probe for octal power tubes

Price $109.00

Eurotubes Octal Bias Probe

Price $30.00

Eurotubes 10 Gauge 3 foot Speaker Cable

Price $33.00

Eurotubes 10 Gauge 6 foot Speaker Cable

Price $42.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.