Fender EVH 5150 III 50 Watt High Gain Option

Custom Kit

Want it your way? The "Custom Kit" is just that, you get to choose all your preamp tubes! We'll give you all the combinations that we know work and then you can choose what you want. The default power tubes are a matched pair of the JJ 6L6GC’s. However you can configure this kit to use the JJ 5881’s. Please see the "More Details" info for a detailed description of the tonal differences.

Custom Kit

Power-Tubes

The default power tubes are a matched pair of the JJ 6L6GC’s. However you can configure this kit to use the JJ 5881’s. Please see the "More Details" info for a detailed description of the tonal differences.

6L6GC Matched Pair -

More details

5881 Matched Pair -

More details

The first position preamp tube closest to the input jack is what we call V1. It is the main input tube and shapes the entire tone stack, here you can maintain gain, reduce it, increase it or smooth it out with a Gold Pin tube. We left the "Quantity Field" active for those of you who may want a couple different V1 tubes to experiment with. Please click on the “More Details” button for an explanation of the tonal differences.

ECC83S Standard -

More details

ECC83S High Gain -

More details

ECC83S Gold Pin -

More details

ECC83 MG Standard -

More details

ECC83 MG Gold Pin -

More details

5751 Standard -

More details

5751 Gold Pin -

More details

ECC81 (12AT7) Standard -

More details

ECC81 Gold Pin -

More details

V6 is the third gain stage for channels one and two, here you can again increase or decrease the gain or smooth it out with a Gold Pin tube. The only tubes we stay away from in V6 are the long plate tubes which are more prone to feeding back at higher gain settings. Please click on the “More Details” button for an explanation of the tonal differences.

ECC83S Standard -

More details

ECC83S High Gain -

More details

ECC83S Gold Pin -

More details

ECC83 MG Standard -

More details

ECC83 MG Gold Pin -

More details

5751 Standard -

More details

5751 Gold Pin -

More details

ECC81 (12AT7) Standard -

More details

ECC81 Gold Pin -

More details

Bias Probes and Multimeters

These amps are adjustable and you can use the factory test points and a Multimeter or you can use a bias probe with a Multimeter which is more accurate, or you can use our All-in-one "Pro One" bias probe which reads the plate voltage and the plate current simultaneously.

Eurotubes Octal Bias Probe -

More details

Cables-

These are made in-house from USA made real 10 Gauge oxygen free copper cable and high quality heavy duty 1/4" jacks. These cables leave no frequency unheard!

Eurotubes 10 Gauge 3 foot Speaker Cable -

More details

Eurotubes 10 Gauge 6 foot Speaker Cable -

More details

Configure: Fender EVH 5150 III 50 Watt Custom Retube Kit