Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Egnater Tweaker Standard Retube Kit

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Egnater > Egnater Tweaker

Price: $113.00

Egnater Tweaker Standard Retube Kit

Product Details

Need some new glass? This is our Standard Retube Kit for the Egnater Tweaker Heads and Combo Amps. It contains three ECC83S's one being current balanced for the phase inverter in V3. The default power tubes are a matched pair of JJ 6V6S's but if you remove the vent on the Tweaker Heads you can configure this kit to use almost any set of power tubes including the JJ EL34II's, EL34’s, KT77’s, Big Bottle 6CA7’s, JJ 6V6S's, 5881's, 6550's, KT66's or KT88's by clicking on the "Customize" button!

Note: Tweaker combo amps place the tubes horizontally and they just barely clear the speaker (poor design) so we do not recommend using the big bottle tubes such as KT66's, 6550's and KT88's!

The Balanced ECC83S is located in V3 closest to the power tubes.

Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If your amp is the combo version and you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings for the power tubes because almost rest on the speaker! These are available in the "Related Products” tab as a set of two large dampers and will greatly decrease tube rattle.

If you choose to use the KT66's, 6550's or KT88's and your amp has the "Bear Trap" style tube retainers you may want to swap these out for the "Spring and Cap" style retainers. These are 5.00 a pair and mount using the same screws as the stock retainers.

These amps are cathode biased, there is no bias adjustment to be made.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

Spring & Cap Retainer for Big Bottle octal power tubes - Pair

Price $5.00

Eurotubes 10 Gauge 3 foot Speaker Cable

Price $33.00

Eurotubes 10 Gauge 6 foot Speaker Cable

Price $42.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.