Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Diezel Herbert Standard Retube Kit

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Diezel > Diezel Herbert

Price: $300.00

Diezel Herbert Standard Retube Kit

Product Details

Need some new glass? This is the Standard Retube Kit for the Diezel Herbert. The preamp section uses six ECC83S's with one balanced for the phase inverter in V6. The default power tubes are three matched pairs of the JJ Electronic KT77's but you can configure the kit to use three different pairs of almost any octal power tubes including the JJ E34L's, EL34II's, EL34’s, Big Bottle 6CA7’s, JJ 5881's, 6550's, KT66's or KT88's by clicking on the "Customize" button! You can even run a pair of KT77's, KT66's and KT88's! The possibilities are endless.

The Balanced ECC83S is located in V6 which is located farthest from the input jack.

If you choose to use the KT66's, 6550's or KT88's and your amp has the "Bear Trap" style tube retainers you may want to swap these out for the "Spring and Cap" style retainers. These are 5.00 a pair and mount using the same screws as the stock retainers. These are also available under the "Related Products" tab as pairs.

These are adjustable bias amps and if you use the Diezel method of removing fuses to measure bias all you need is a Multimeter. This method is a bit tedious, it's much easier and convenient to use a bias probe and a Multimeter or our all-in-one "Pro One" bias probe that reads both the plate current and the plate voltage simultaneously. You can find all these under the Related Products Tab.

You can use our Generic Bias Video for reference.

The video below explains the difference between bias probe types.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

Eurotubes “Pro One” Bias Probe for octal power tubes

Price $109.00

Eurotubes Octal Bias Probe

Price $30.00

Eurotubes 10 Gauge 3 foot Speaker Cable

Price $33.00

Eurotubes 10 Gauge 6 foot Speaker Cable

Price $42.00

Spring & Cap Retainer for Big Bottle octal power tubes - Pair

Price $5.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.