Diezel Hagen and D-Moll Heads Custom Retube Kit

Custom Kit

Want it your way? The "Custom Kit" is just that, you get to choose your power tubes from the "Power-Tubes" category and all your preamp tubes! We'll give you all the tube types that we know work. Then you can choose your V1 tube and all your other preamp tubes! We give you all the positions and you fill them!. We left the quantity fields open so that spares or multiple tubes could be ordered to experiment with.

Custom Kit

Spring & Cap style tube retainers

If you choose to use the KT66's, 6550's or KT88's and your amp has the "Bear Trap" style tube retainers you may want to swap these out for the "Spring and Cap" style retainers. These are 10.00 a quad and mount using the same screws as the stock retainers.

Spring & Cap Retainer for Big Bottle octal power tubes - Quad -

More details

Bias Probes and Multimeters

These are adjustable bias amps and if you use the Diezel method of removing fuses to measure bias all you need is a Multimeter. This method is a bit tedious, it's much easier and convenient to use a bias probe and a Multimeter or our all-in-one "Pro One" bias probe that reads both the plate current and the plate voltage simultaneously.

Eurotubes “Pro One” Bias Probe for octal power tubes -

More details

Eurotubes Octal Bias Probe -

More details

Cables-

These are made in-house from USA made real 10 Gauge oxygen free copper cable and high quality heavy duty 1/4" jacks. These cables leave no frequency unheard!

Eurotubes 10 Gauge 3 foot Speaker Cable -

More details

Eurotubes 10 Gauge 6 foot Speaker Cable -

More details

Configure: Diezel Hagen and D-Moll Heads Custom Retube Kit