Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Diezel Einstein 50 Head High Gain Option

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Diezel > Diezel Einstein 50

Price: $192.50

Diezel Einstein 50 Head High Gain Option

Product Details

Want all the gain you can get? This is the High Gain Option Retube Kit for the Diezel Einstein 50 Head. The preamp section uses two standard ECC83S's for V4 and V5 along with four handpicked High Gain ECC83S's with one balanced for the phase inverter in V6. The default power tubes are a matched pair of the JJ Electronic E34L's but you can configure this kit to use almost any matched pair of octal power tubes including the JJ EL34II's, EL34’s, KT77’s, Big Bottle 6CA7’s, JJ 5881's, 6550's, KT66's or KT88's by clicking on the "Customize" button!

The Balanced High Gain ECC83S is located in V6 which is located farthest from the input jack. The two standard ECC83S's are located in V4 and V5.

If your amp has the "Bear Trap" style tube retainers you may want to swap these out for the "Spring and Cap" style retainers. These are 5.00 a pair and mount using the same screws as the stock retainers. These are also available under the "Related Products" tab as pairs.

These are adjustable bias amps and if you use the Diezel method of removing fuses to measure bias all you need is a Multimeter. This method is a bit tedious, it's much easier and convenient to use a bias probe and a Multimeter or our all-in-one "Pro One" bias probe that reads both the plate current and the plate voltage simultaneously. You can find all these under the Related Products Tab.

You can use our Generic Bias Video for reference.

The video below explains the difference between bias probe types.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

Eurotubes “Pro One” Bias Probe for octal power tubes

Price $109.00

Eurotubes Octal Bias Probe

Price $30.00

Eurotubes 10 Gauge 3 foot Speaker Cable

Price $33.00

Eurotubes 10 Gauge 6 foot Speaker Cable

Price $42.00

Spring & Cap Retainer for Big Bottle octal power tubes - Pair

Price $5.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.