Bugera 6260 Custom Retube Kit

Custom Kit

Want it your way? The "Custom Kit" is just that, you get to choose your power tubes and all your preamp tubes! We'll give you all the power tube options and then you can choose your V1 tube and all your other preamp tubes! We give you all the positions and you fill them!. We left the quantity fields open so that spares or multiple tubes could be ordered to experiment with.

Custom Kit

Power-Tubes

The default tubes are a matched quad of the 6L6GC's but you can also run any of the tubes listed. Please click on the “More Details” button for an explanation of the tonal differences.

6L6GC Matched Quad -

More details

5881 Matched Quad -

More details

E34L Matched Quad -

More details

EL34II Matched Quad -

More details

6CA7 Matched Quad -

More details

KT77 Matched Quad -

More details

EL34 Matched Quad -

More details

EuroDamper Tube Damper Rings

If your amp is the combo version and you have chosen to use the JJ 6L6GC's then please let us know in the comments section and we will ship your kit with the special Double Mica 6L6GC’s at no extra charge which will greatly reduce any tube rattle. JJ Electronic started building us a proprietary version of their 6L6GC (the 6L6GC-DM) in 2005 with extra layers of mica. This reinforces the plate structure and all but eliminates tube rattle symptoms. For all other tubes such as EL34’s, KT77's and 6CA7's, we recommend using our EuroDamper rings.

EuroDamper Large - Set of Four -

More details

Bias Probes and Multimeters

The non-Infinium amps are adjustable bias amps. You can use the factory test point and a Multimeter however this is not an accurate way to bias the amp. The most accurate way to set the bias is to use a bias probe and a Multimeter, or our all-in-one Eurotubes "Pro One" bias probe that reads both the plate current and the plate voltage simultaneously.

Eurotubes “Pro One” Bias Probe for octal power tubes -

More details

Eurotubes Octal Bias Probe -

More details

Cables-

These are made in-house from USA made real 10 Gauge oxygen free copper cable and high quality heavy duty 1/4" jacks. These cables leave no frequency unheard!

Eurotubes 10 Gauge 3 foot Speaker Cable -

More details

Eurotubes 10 Gauge 6 foot Speaker Cable -

More details

Configure: Bugera 6260 Custom Retube Kit