Want all the gain you can get? This is the High Gain Option Retube Kit for the Traynor YCV 50. The preamp section uses three handpicked High Gain ECC83S's with one balanced for the phase inverter in V3. The default power tubes are a matched pair of the JJ E34L's but you can configure this kit to use the JJ EL34's, EL34II's, KT77’s or Big bottle 6CA7's by clicking on the "Customize" button!
Want all the gain you can get? This is the High Gain Option Retube Kit for the Traynor YCV 50. The preamp section uses three handpicked High Gain ECC83S's with one balanced for the phase inverter in V3. The default power tubes are a matched pair of the JJ E34L's but you can configure this kit to use the JJ EL34's, EL34II's, KT77’s or Big bottle 6CA7's by clicking on the "Customize" button!
Want all the gain you can get? This is the High Gain Option Retube Kit for the Traynor YCV 50. The preamp section uses three handpicked High Gain ECC83S's with one balanced for the phase inverter in V3. The default power tubes are a matched pair of the JJ E34L's but you can configure this kit to use the JJ EL34's, EL34II's, KT77’s or Big bottle 6CA7's by clicking on the "Customize" button!
The Balanced High Gain ECC83S is located in V3 farthest from the power tubes.Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings for the power tubes such as EL34’s, E34L’s KT77 and 6CA7’s. These are available in the "Related Products” tab as a set of two. These will greatly decrease tube rattle.